INTERNAL DESIGN STUDY / NOT BUILT

Compact
motor controller.

A brushed-DC control study connecting motor-drive requirements, component choices and a compact PCB layout.

KiCad render of the motor-control PCB design study
KiCad 3D render · Internal practice design · No customer commission

THE BRIEFControl a motor with a compact board.

The public brief called for control electronics for a motor or pump. The study selected a brushed-DC architecture, a speed control and a direction switch; detailed operating values are design assumptions.

DESIGN DECISIONLet thermal limits shape the requirement.

The study pairs a motor driver with a small microcontroller and includes reverse-supply protection. Thermal calculations led to a lower continuous-current target during design review, rather than carrying an unsupported target into the layout.

IMPLEMENTATIONKeep the handoff connected.

The saved work includes a 50 × 40 mm, two-layer layout, manufacturing outputs and a firmware pin map. The design record explains the relationship between protection, motor drive and logic supply.

VERIFICATION STATUSA routed study, with a review still open.

The layout approval remains open because a via-related rule needs resolution. The board has not been ordered, built or tested. The render documents a design state, not verified operating performance.

RELATED SERVICEDevelop your own board.

Explore Design & Prototype

Tell us about your project.

Discuss your project